Phone: +86 13538126663
Tel: +86 13538126663
Company: Shenzhen Lei Xinda Intelligent Technology Co., Ltd.
Add: 2 / f, no. 13, longshan road, nanling, nanwan street, longgang district, shenzhen, guangdong.
Built-in cigarette lighter tire pressure monitor
TPMS tire pressure monitoring system "Tire Pressure Monitoring System" is mainly used for real-time tire pressure, tire pressure is too high, rapid leak, tire temperature is too high and the battery voltage is low, etc. Carry out automatic monitoring and alarming, provide valid information for car drivers to maintain adequate tire pressure, prevent puncture accidents, increase the safety of driving cars, reduce the extra pressure generated by insufficient tire pressure, and extend tires. The service life.
The direct tire pressure monitoring system is equipped with a high-sensitivity sensor in each tire. It can monitor the tire pressure and temperature in real time. After digital-to-analog conversion, the data is transmitted via radio signals to a monitor installed on the bridge. The tire pressure Values and temperature values are immediately displayed visually. If the tire pressure is too high or too low during driving, the system will alarm immediately if the tire is leaked due to any reason (such as foreign body sticking into the tire, tire scratching, etc.), thus ensuring safe driving.
TPMS Wireless Tire Pressure Monitor uses the world's top line sensor chipset and has a number of patented wireless communication technologies that do not require the addition of repeaters. When the car runs at high speed, the signal reception is accurate, and it can truly and intuitively reflect the tire pressure conditions. It is currently advanced technology, stable performance tire pressure system.
1. Installation location and charging
The monitor should be installed in a location that does not affect the line of sight. Use a Velcro stick or place on a non-slip mat to prevent it from falling. The first use requires connecting the car cigarette lighter to full charge.
2. On/Off screen, long press "standby" button
The tire pressure monitoring system receiver has the function of automatic start/standby. If you need to switch the machine on and off, press and hold the “standby” button until you hear a “Bi” sound.
3. Adjust the backlight, press the "-" key or press the "+" key
The tire pressure monitoring system receiver has the function of automatically adjusting the backlight. If you need to switch on and off manually, press the “-” key to reduce the brightness, press the “+” key to increase the brightness, or turn off the backlight.
Second, inflatable code
When the user needs to interchange the tires, or there is a wrong code, or forget the location where the sensor is installed during the assembly process, the code operation is required.
1. Long press the "SET" button.
2. Display "LF" and old ID code.
3. Press the "-" or "+" key to switch to the tire position to be coded.
4. If the built-in sensor is already installed, inflate the tire. If you are installing an external sensor, screw the sensor to the nozzle.
5. When the monitor senses that it is inflated, it will sound "Bi" and display the new ID code received.
6. According to the above steps in turn to other tire code, long press "SET" key to save.