Many traffic accidents are caused by the blind area of the driver's vision. Lei xinda's tire pressure monitor is summarized as the blind area of the visual field. The pedestrian drivers should know:
A column blind area: watch the slow speed to avoid.
There are three columns on the side of the car body, and the front windscreen is called "A pillar". The front and back door position is called "pillar B". The rear windscreen is flanked by a "C column".
These columns will cause the driver to have A blind area, especially A column blind area. The position of the steering wheel of Chinese car is mostly on the left side of the car. When the car is turning or entering the curve, the driver's vision will be blocked by the column, especially if the left turn is the largest.
Nowadays, many brand cars will add A small triangular window to the side of A pillar, but there is no fundamental solution to the important problem of A column blind area. For automotive designers, A column size has always been A dilemma. A column is too small to reduce the strength of the car, too general assembly to enlarge the blind area.
Coping method: intelligent security system, can carry out blind spot alarm. As long as the car or person enters A column blind spot, the system automatically alarms. Without such a system, drivers should pay more attention to road conditions, slow down at the corners and see the road safety.
Second, inner wheel poor blind area: far from the cart.
Most of the accidents caused by large lorries are caused by the blind area of the inner wheel in the right turn. Models have ouchi rounds of poor vision could do a lot of blind area, trucks, vans, etc longer vehicles, car body front turn past, did not turn from his body in the past, creates the "dead zone". The inner wheel of the car is close to one meter, and the inner wheel of the cab is more than two meters.
How to cope: pedestrians on the road should not be too close to the turning vehicles. They should be more than 2 meters away from the large vehicles. Don't beat the turn of the car at the green light. Don't go beyond the zebra crossing, you may be caught in the wheel by the inside and outside wheel of the turning vehicle.
3. Overtaking blind area: the front car suddenly slows down more than half of the time.
Drivers may not be able to see the front of the car or the car in front of the car, and the car will not be able to see the car.
Coping method: "overtaking head and tail" means to look at the front of the car when passing the same direction. The car may have an accident ahead or a pedestrian or obstacle ahead. Pay attention to the rear of the car when you are in the car.
4. Rear view mirror blind area: don't change the channel continuously, and observe the rearview mirror.
If the car has two or more lanes in a row, the rearview mirror will not be able to see the turn of the car in the lane, causing the turn blind spot.
How to deal with it: always look at the mirror and see what's going on behind the car. If the car behind the car disappears or into the blind area, be careful of the lane change. When you turn the corner, turn the car to the direction of the car and make sure you can drive.
5. Blind area of mountain road: the mountain road is curved, slow and concentrated.
On the rugged mountain road, the curve of the road is a lot of blind alley, the s-shaped curve is very likely to have a car coming out of the curve. If you encounter a steep slope, it will also cause a large blind area.
How to deal with it: pay more attention to the sign when driving the mountain road, and honk the horn when turning. Slow down to the right.
6. Light blind area: don't get too close to the car when the car pulls out of the tunnel.
When the driver goes out of the tunnel, the light variable creates a blind spot in the eyes. Driving at night, the driver is stimulated by light, also can produce blind area.
How to cope: pay attention to the distance between vehicles. Don't get too close to the car when you exit the tunnel or burn the midnight oil.